Top 10 Suction Vacuum Pump

0
549 reviews analysed

1. CARSC Hand Held Vacuum Pump Tester Kit with Adapter and Case is Suitable for Automotive Vacuum Gauge and Brake Exhaust Kit (Blue)

CARSC Hand Held Vacuum Pump Tester Kit with Adapter and Case is Suitable for Automotive Vacuum Gauge and Brake Exhaust Kit (Blue)

Feature

Description

Color:blue

High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool KitsSPECIFICATIONS: Condition: 100% brand new Material: Alloy steel, plastics, rubberWeight: 1.04kgDimension of case: 13.5*8.7*2 inch / 34.3*22*5 cmPressure range: 0-30inHg, 0-760mmHgPACKAGE INCLUED:_1 x vacuum pump/brake bleeder with vacuum gauge_1 x reservoir jar & 2 x lids_1 x “T” hose connector_1 x straight hose connector_1 x universal cup adapter_1 x blow mold case_1 x user manual_2 x 24″ vacuum hoses_2 x 3″ vacuum hoses2 x tapered hose adapters_3 x brake bleeder valve adaptersNOTE:Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals

2. SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

Feature

3. Vacuum Pump – 12V

Vacuum Pump - 12V

Feature

4. DAMO 10" Vacuum Suction Cup Heavy Duty Glass Lifter with Metal Handle and Hand Pump Suction Cups for Glass & Granite Lifting

DAMO 10" Vacuum Suction Cup Heavy Duty Glass Lifter with Metal Handle and Hand Pump Suction Cups for Glass & Granite Lifting

Feature

Description

Product Description

Use the cup on clean, relatively smooth, nonporous surfaces, at temperatures from 10 to 120 Fahrenheit . Moisture or contaminants can reduce the slip resistance of the cup. The red-line indicator may not perform reliably at elevations above 5000 feet.

To Attach
1) Position the hand cup on the contact surface so the red line will be visible if it should appear while lifting the load. CAUTION: Test the cup for staining or deformation of load surfaces with light colors or soft coatings.
2) Pump the plunger until the cup attaches completely. When the red line is hidden, vacuum is sufficient for lifting.
3) Check the plunger frequently to make sure the cup remains securely attached. If the red line appears while lifting, set down the load immediately and pump the plunger until the red line is hidden again.

To Release
1) Set the load on a secure support.
2) Press the valve release lever until the cup disengages completely.

Maintenance
Since aging and wear reduce the capacity of the rubber pad, it should be replaced at least once every 2 years or whenever cuts, slits or other surface damage is discovered. Always inspect vacuum pads before use. Clean vacuum pads and the load surface between each lift. Make sure both surfaces are dry and free of any dirt or obstruction. Make sure plunger has enough lubrication for pump.

Damo Diamond Tools, LLC is not responsible for any personal injuries and property damages due to incorrect usage of our products according to our Instructions.

We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing .

5. Velleman VTDESOL3U Vacuum Desoldering Pump With Heater 30W

Velleman VTDESOL3U Vacuum Desoldering Pump With Heater 30W

Feature

Description

Color:Original Version

VELLEMAN VTDESOL3U VACUUM DESOLDERING PUMP WITH HEATER 30W

6. Hanperal DC 12V 5L Transfer Pump Extractor Oil Fluid Scavenge Suction Vacuum

Hanperal DC 12V 5L Transfer Pump Extractor Oil Fluid Scavenge Suction Vacuum

Feature

Description

Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Pressure: Max. 0.8MPA
Maximum Flow: 5L/min
Color: Black
Pump Diameter: Approx. 4.8cm/1.89″
Length: Approx. 14.5cm/5.7″
Outlet pipe size(Dia.*L): Approx. 10mm*137cm
Inlet pipe diameter: Approx. 8mm,6 mm ; Length: Approx. 110cm/43.3″

Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe

How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2.Then connect the pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move;
then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely);
as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean.
5.If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Note:
If you want to connect this pump to AC power, you will need a power converter.
Make sure the engine up to operating temperature!

7. EZBASICS Wine Saver Vacuum Pump with 2 Wine Stoppers, Stainless Steel

EZBASICS Wine Saver Vacuum Pump with 2 Wine Stoppers, Stainless Steel

Feature

8. ZUOS 10" Vacuum Concave Suction Cup for Granite & Glass Lifting, Glass Suction Cup Vacuum Glass Lifter with Metal Handle and Brass Pump,240lbs Load Capacity

ZUOS 10" Vacuum Concave Suction Cup for Granite & Glass Lifting, Glass Suction Cup Vacuum Glass Lifter with Metal Handle and Brass Pump,240lbs Load Capacity

Feature

9. HSH-Flo 12V/24VDC 6W 8L/min 120Kpa Electrical Vacuum Suction Air Compressor Mini Vacuum Pump for Suction Milk (12VDC)

HSH-Flo 12V/24VDC 6W 8L/min 120Kpa Electrical Vacuum Suction Air Compressor Mini Vacuum Pump for Suction Milk (12VDC)

Feature

Description

Color:12VDC

Performance Data:
◎Type: DC12V Mini Vacuum Pump;
◎ Operating Voltage: DC9V ~ 14V ;
◎ Rated Voltage: DC12V ;
◎ Positive Pressure: >500mmHg;
◎ Negative ≤-620mmHg;
◎ Rated Current: <850mA ;
◎ Rated Power: 6Watt;
◎ Suction Capacity: 8L/Min;
◎ Inlet diameter:6mm;
◎ Outlet diameter: 6mm;
◎ Vacuum Degree: 66Kpa ;
◎ Maximum Pressure: 120Kpa;
◎ Noise:<60db;>
◎ Size: As Picture Shows;
◎ Color: As Picture Shows;
◎ Package Include:
1 x Micro Vacuum Pump

10. ZUOS 8"Powr-Grip Glass suction cup for Granite & Glass Lifting, Vacuum Suction Cup Vacuum Glass Lifter with Metal Handle and ABS Pump,220lbs Load Capacity(With a free case)

ZUOS 8"Powr-Grip Glass suction cup for Granite & Glass Lifting, Vacuum Suction Cup Vacuum Glass Lifter with Metal Handle and ABS Pump,220lbs Load Capacity(With a free case)

Feature

Conclusion

By our suggestions above, we hope that you can found Suction Vacuum Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general