The Best Most Expensive Samsung Heating Element

0
577 reviews analysed
Rank
Product Name
Score

1. Samsung Heating Element Dc47-00019A

Samsung Heating Element Dc47-00019A

Feature

Description

Genuine Original Equipment Manufacturer (OEM) parts! This heating element (part number DC47-00019A) is for dryers. Heating element DC47-00019A generates the dryer’s heat. Disconnect the power before installing this part. Wear work gloves to protect your hands. For Samsung & Kenmore.

2. Supplying Demand DC97-14486A Clothes Dryer Heating Element Compatible W/Samsung

Supplying Demand DC97-14486A Clothes Dryer Heating Element Compatible W/Samsung

Feature

Description

DC97-14486A Complete Heater Element Assembly. Includes heater casing, heater element, thermostat, and high limit. * The hi-limit which is included has been removed and placed in a protected bag for shipping protections against damages. The hi-limit will need to be reattached once you receive the package. The reason for this has been bent spades and damages of the hi-limit from past shipments. *This is not a Whirlpool and/or a Samsung OEM product. The Whirlpool and/or a Samsung brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool and/or a Samsung brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

3. DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

Feature

Description

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

4. DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

DC97-14486A Dryer Heating Element Assembly Replacement for Samsung Includes DC47-00019A Heater Element, DC47-00018A Thermostats DC96-00887A Thermal Fuse Replace DC97-08891A DC9714486A DC97-14486D

Feature

Description

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

5. Dryer Heat Element Replaces Samsung DC47-00019A and Whirlpool 35001247

Dryer Heat Element Replaces Samsung DC47-00019A and Whirlpool 35001247

Feature

Description

A heating element replacement for Samsung and Whirlpool dryer. It replaces parts DC47-00019A and 35001247.

6. Snap Supply Dryer Element for Samsung Directly Replaces DC47-00019A

Snap Supply Dryer Element for Samsung Directly Replaces DC47-00019A

Feature

Description

Color:Snap Supply

DC47-00019A Dryer Heating Element has 5/16″ male terminals. It is rated 5300 Watts, 240 Volts. Compatible with the following Brands: Samsung Cross References: 2068550, PS4205218, TJDC47-00019A, B001ICYB2M. Some Suitable Model Numbers: MDE6700AYW, MDE6700AZW, MDG6700AWM, MDG6700AWW, NED7200TW10, YIED7200TW10.

7. Pack of 2, Samsung Dryer Drum Roller DC97-16782A

Pack of 2, Samsung Dryer Drum Roller DC97-16782A

Feature

8. Dryer Repair Kit Replacement for Samsung – Inlcude DC97-16782A Roller, DC93-00634A Indler Pulley, 6602-001655 Belt – Replace AP5325135 AP4373659 PS4133825

Dryer Repair Kit Replacement for Samsung - Inlcude DC97-16782A Roller, DC93-00634A Indler Pulley, 6602-001655 Belt - Replace AP5325135 AP4373659 PS4133825

Feature

Description

FEATURES:

Durable and long use life / Good wear resistance/ Good oil resistance/ Not easy to break/ Easy to install

REPLACE PART NUMBER:

DC97-16782A drum roller replaces part numbers: AP5325135, 2027851, DC97-07523A, DC97-07523B

DC93-00634A Dryer idler pulley replaces part numbers: AP6038887, DC96-00882B, DC96-00882C, PS11771601, AP4213616, PS4216837

6602-001655 Dryer belt replaces part numbers: 935594, 6602-001314, PS4133825, AP4373659, 6602-001314, 1935594.

PACKAGE INCLUDE:

– 4 * DC97-16782A Dryer Drum Support Roller 

– 1 * 6602-001655 Dryer Drum Belt 

– 1 * DC93-00634A Dryer Idler Pulley 

– 1 *  Installation screws

RETURN POLICY:

100% Money-back or free replacement guarantee;Any question, please feel free to contact us

9. Samsung DC47-00016A Dryer Thermostat Assembly

Samsung DC47-00016A Dryer Thermostat Assembly

Feature

Description

Replacement thermostat assembly for dryer. Genuine replacement part. Operating thermostat monitors and regulates the temperature inside the dryer. Unplug the dryer before installing the operating thermostat. Wear work gloves to protect your hands during this repair.

10. KONDUONE Ultra Durable 4 Inch 8 Feet Clothes Dryer Vent Hose -Fits for Whirlpool Kenmore Maytag Electrolux LG GE Samsung Washer Dryer Transition Ducting Flex Aluminum Exhaust Pipe

KONDUONE Ultra Durable 4 Inch 8 Feet Clothes Dryer Vent Hose -Fits for Whirlpool Kenmore Maytag Electrolux LG GE Samsung Washer Dryer Transition Ducting Flex Aluminum Exhaust Pipe

Feature

Conclusion

By our suggestions above, we hope that you can found Most Expensive Samsung Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general