Top 10 Antistatic Mat With Ground Cable Desktop

0

Finding your suitable readers for anti-static mat with ground cable desktop is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for anti-static mat with ground cable desktop including detail information and customer reviews. Let’s find out which is your favorite one.

826 reviews analysed

1. Rosewill Anti-Static Mat with Grounding Wire. ESD Mat Size 23.6 x 23.6 Inch. 10 Feet Coiled Grounding Cable with Alligator Clip ESD Desktop Mat RTK-ASM

Rosewill Anti-Static Mat with Grounding Wire. ESD Mat Size 23.6 x 23.6 Inch. 10 Feet Coiled Grounding Cable with Alligator Clip ESD Desktop Mat RTK-ASM

Feature

2. StarTech.com 24×27.5in Beige Desktop Anti-Static Mat (M3013)

StarTech.com 24x27.5in Beige Desktop Anti-Static Mat (M3013)

Feature

3. ESD Anti-Static Rubber Mat with Wrist Strap and Ground Wire, High-Temperature Resistant, Electrostatic Discharge Protection, Yuanj Repair Hand Tools Set for iPhone Repairing

ESD Anti-Static Rubber Mat with Wrist Strap and Ground Wire, High-Temperature Resistant, Electrostatic Discharge Protection, Yuanj Repair Hand Tools Set for iPhone Repairing

Feature

Description

When you repair computers and other sensitive electronic components, with this item ,it will ensure that no sensitive components are damaged. This compact wrist strap eliminates static without the need for a pesky grounding cord.

Features:

Anti-static wrist strap is a wrist wear band for releasing human body electrostatic charge; anti-static mat is resistant to acid, alkali, chemical soldering flux, wear-resisting and easy to clean.
Anti-static mat can be applied on desktop, wire worktable surface and so on, to prevent equipment from electrostatic damage.
Anti-static wrist strap is composed of anti-static soft elastic, buckle, soft cable, protective resistor and banana connector.
Make sure the wrist strap is directly contact your skin, and grounding cable is connected to ground when using.
Wear the anti-static wrist strap, it can safely remove static on human body within 0.1 seconds, it is a necessary and widely used anti-static equipment.

Specifications:

Mat Material: Vinylbr> Mat Size: 18′ Wide x 30′ Long x 0.093″ Thick
Mat Temperature Resistance: 380℃
Wrist Strap Material: PVC
Cable Size: 2mm*1.8m/0.07*70.86″
Static Decay Time: 0.1sec
Surface Resistance: 106Ω-109Ω

Instruction:

1. Put the mat on worktable, and install a antistatic ground socket
(not included) on the side of the worktable.
2. Cut a small opening on the mat then put the four-claw part into it.
3. Connect the other end of cable to antistatic ground socket.
4. Wear the wrist strap and connect the other end to antistatic ground socket.

Package Includes:
1 x Wrist Strap
1 x Mat
2 x Cables

4. Anti-Static Mat ESD Safe for Electronic Includes ESD Wristband and Grounding Wire, HPFIX Silicone Soldering Repair Mat 932°F Heat Resistant for iPhone iPad iMac, Laptop, Computer, 15.9” x 12” Grey

Anti-Static Mat ESD Safe for Electronic Includes ESD Wristband and Grounding Wire, HPFIX Silicone Soldering Repair Mat 932°F Heat Resistant for iPhone iPad iMac, Laptop, Computer, 15.9” x 12” Grey

Feature

Description

This product is a perfect birthday gift for farther, or husband, or friends.

HPFIX Silicone ESD Anti-static Mat
Silicone ESD Mats are primarily used to prevent electronic circuit boards and other electronic products from damage by an electrostatic charge.
Static control is critical during electronic assembly and manufacturing.
ESD general purpose mat are made of pure anti-static silicone material with ESD properties and have a light texture.
HPFIX ESD silicone mat kits are designed to provide a static safe work surface to protect static sensitive devices.
These mat kits are also known as ESD Table Top Mat Kits or ESD Work surface Mat Kits.
The kits come with an adjustable anti-static wrist strap and grounding cord/clip.

HPFIX is the first manufacture use 100% pure anti-static silicone material to make big size anti-static silicone soldering mat. With features of anti-static, high temperature heat resistant,
big working surface,Independent sub-grids placing screws or small parts which keep desk clean and tidy, you will find it’s a necessary tool mat for assembling electronics product and provide convenience for your work.

Anti-corrosion to the Mat
It can be directly rubbed with water thinner, excellent anti-sticking performance, AB glue, quick-drying glue can not stick.

Specification:
Resistivity: 10^6 – 10^8 ohms
High-temperature resistance coefficient : 932°F, (500℃)
Dimension Size: 15.9” (L) x 12” (W) x 0.15” (H)
Thickness: 0.15 inches
Weight:0.99lb (450g)
Color: Grey
Material: Food grade anti static silicone

Package includes :
1x Anti-static Silicone Heat Insulation Soldering Mat
1x ESD Wristband
1 x Grounding Cord
1 x Product Instruction

5. Bertech ESD Mat Kit with a Wrist Strap and Grounding Cord, 2′ Wide x 4′ Long x 0.093" Thick, Gray (Made in USA)

Bertech ESD Mat Kit with a Wrist Strap and Grounding Cord, 2' Wide x 4' Long x 0.093" Thick, Gray (Made in USA)

Feature

Description

Size:2′ Wide x 4′ Long x 0.093″ Thick |  Color:Gray

Bertech ESD Mat Kits are made of a single layer polymer mix. They are designed to provide a static safe work surface for static sensitive products. These ESD Mat Kits are low cost, durable, easy to cut and are reversible. Surface resistivity is 10^8 – 10^9. Meets ASTM D412, D1004, D2240-75 and ESD S4.1-1997 standards. Service temperature is -20 Degrees to 160 Degrees Fahrenheit.

6. Anti-Static Wrist Strap with Anti Static Mat, Alligator Clip, and Grounding Cable Electrostatic Discharge Protection Anti-Static Wrist Band Set for Phone Repair, Sensitive Electronics Working

Anti-Static Wrist Strap with Anti Static Mat, Alligator Clip, and Grounding Cable Electrostatic Discharge Protection Anti-Static Wrist Band Set for Phone Repair, Sensitive Electronics Working

Feature

Description

An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge

Specifications:
Mat Material: Silicone
Mat Size: 30 x 40cm/11.81 x 15.74″
Mat Thickness: Approx. 2mm/0.07 (1mm error)
Mat Temperature Resistance: 380℃
Wrist Strap Material: PVC
Grounding Wire Size: 2mm x 1.8m/0.07 x 70.86″
Static Decay Time: 0.1sec
Surface Resistance: 106Ω-109Ω

Instruction:
1. Put the mat on worktable, and install a antistatic ground socket (not included) on the side of the worktable.
2. Cut a small opening on the mat then put the four-claw part into it.
3. Connect the other end of cable to antistatic ground socket.
4. Wear the wrist strap and connect the other end to antistatic ground socket.

Package Includes:
1 x Wrist Strap
1 x Mat
2 x Grounding Wire

7. Bertech ESD Soldering Mat Kit, 2 Feet Wide x 4 Feet Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

Bertech ESD Soldering Mat Kit, 2 Feet Wide x 4 Feet Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

Feature

Description

Size:2′ Wide x 4′ Long x 0.06″ Thick | Color:Blue

Bertech ESD Soldering Mat Kits are .060 inches thick and have two layers. The top layer is a blue, static dissipative rubber layer laminated to a black conductive rubber bottom layer. These ESD Soldering Mat Kits provide excellent resistance to oil, grease, and most common solvents. They very light compared to our single layer and three layer mats. The Kit includes an ESD mat, common point ground cord, and an adjustable fabric wrist strap with a removable alligator clip. RoHS and REACH Compliant.

8. QWORK Grounding Mat, 20” x 27.5”, ESD High Temperature Mat Kit, Anti Static Mat

QWORK Grounding Mat, 20'' x 27.5'', ESD High Temperature Mat Kit, Anti Static Mat

Feature

9. ESD High Temperature Mat Kit | 16" x 24" | Emerald Green | with (1) ESD Wrist Strap, (1) ESD Grounding Cord, (1) Bottle of Mat Cleaner

ESD High Temperature Mat Kit | 16" x 24" | Emerald Green | with (1) ESD Wrist Strap, (1) ESD Grounding Cord, (1) Bottle of Mat Cleaner

Feature

Description

PROTECT YOUR VALUABLE ELECTRONICS FROM STATIC ELECTRICITY:
Each kit includes everything you will need to prevent static electricity damage to your electronics. With an ESD Mat, wrist strap, grounding cord, and mat cleaner, this kit is a one stop shop for your work station. Our mat’s ability to dissipate static electricity discharge is second to none. Work with confidence knowing that this mat conforms to the most stringent ESD and lead-free standards. Having met both the ANSI/ ESD S20.20 and European IEC 613450-5-1 specifications, you can be confident that your mat will retain a near zero charge as you work.

FEATURES:

  • .08” (2mm) thickness
  • Embossed surface finish
  • .05 second decay time
  • No vinyl monomers or DOP
  • 10^6 – 10^8 ohms, ohms per cm for RTT, RTG, and Vol R: meets industry electrical specifications in all humidities

ELECTRICAL PROPERTIES (@ 12% HUMIDITY):

  • Resistance between two points (RTT) ANSI – ESD S4.1: 10 volts 2.1 x 10^7 ohms; 100 volts 1.3 x 10^7 ohms
  • Resistance between point-to-ground (RTG) ANSI – ESD S4.1: 10 volts 6.1x 10^7 ohms; 100 volts 5.3 x 10^7 ohms
  • Volume Resistivity: 4.6 x 10^7 ohms-cm @ 12% RH (after 48 hours)
  • Conformance: Meets or exceeds ASTM F-150, NFPA-99, ANSI/ESD STM 7.1, UL-779, EN 100015, DIN 51953, ANSI/ESD S20.20, and IEC-61340-5-1

10. Bertech ESD Rubber Mat Kit, 18 Inches Wide x 24 Inches Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

Bertech ESD Rubber Mat Kit, 18 Inches Wide x 24 Inches Long x 0.06 Inches Thick, Blue, Includes a Wrist Strap and Grounding Cord, RoHS and REACH Compliant (Assembled in USA)

Feature

Description

Size:18″ Wide x 24″ Long x 0.06″ Thick

Bertech ESD Rubber Mat Kits are .060 inches thick and have two layers. The top layer is a blue, static dissipative rubber layer laminated to a black conductive rubber bottom layer. These ESD Two Layer Mat Kits provide excellent resistance to oil, grease, and most common solvents. They are very light compared to our single layer and three layer mats. The Kit includes an ESD mat, common point ground cord, and an adjustable fabric wrist strap with a removable alligator clip. RoHS and REACH Compliant.

Conclusion

By our suggestions above, we hope that you can found Antistatic Mat With Ground Cable Desktop for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general